Aruba 510 Series Access Points

Your Preferred Aruba Partner

J&M Eastern Group is a HPE Aruba supplier in Malaysia that specializes in HPE Aruba Access Points. As one of the top HPE Aruba partner and reseller in Malaysia, we carry a wide range of HPE Aruba products to meet your requirements and quickly respond to the demands of your business. Our team is well experienced with Aruba products, solutions and services.

Aruba is the industry leader in wired, wireless and security networking solutions.

For medium-sized mobile and IoT deployments

Wi-Fi 6 access point high-performance, medium-density connectivity designed for environments such as education centers, lodging, and typical office spaces.

Ultimate efficiency

Built on Wi-Fi 6 standards, 510 Series APs include features such as OFDMA, MU-MIMO, and Target Wake Time for better multi-user performance and improved efficiency.

IoT and location ready

Cost-effective connectivity for Zigbee, Bluetooth, and third party overlays to simplify the deployment and management of IoT services. Target Wake Times for secure storage of credentials, keys, and boot code.

Simple and secure access

Protects network security with stronger encryption and authentication, secure credentials/keys storage, and user and IoT access policy enforcement firewalls.

Looking for Aruba supplier in Malaysia? As a leading Aruba partner and Aruba supplier in Malaysia we specialise in Aruba Products: Aruba switches, transceivers, access points, wireless controllers, power injectors and Aruba accessories.

Aruba 510 Series Campus Access Points

Very high Wi-Fi 6 (802.11ax) performance with dual radios


  • Up to 2.69Gbps combined peak datarate
  • WPA3 and Enhanced Open security
  • Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 devices
  • OFDMA and MU-MIMO for enhanced multi-user efficiency
  • IoT-ready Bluetooth 5 and Zigbee support
  • Embedded ranging technology for accurate indoor location measurements

Technical Specifications

Hardware variants

  • AP-514: External antenna models
  • AP-515: Internal antenna models

Wi-Fi radio specifications

  • AP type: Indoor, dual radio, 5GHz 802.11ax 4x4 MIMO and 2.4GHz 802.11ax 2x2 MIMO
  • 5GHz radio:
    • Four spatial stream Single User (SU) MIMO for up to 4.8Gbps wireless data rate to individual 4SS HE160 802.11ax client devices (max)
    • Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical)
    • Four spatial stream Multi User (MU) MIMO for up to 4.8Gbps wireless data rate to up to four 1SS or two 2SS HE160 802.11ax DL-MU-MIMO capable client devices simultaneously (max)
    • Four spatial stream Multi User (MU) MIMO for up to 2.4Gbps wireless data rate to up to four 1SS or two 2SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)
  • 2.4GHz radio:
    • Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate to individual 2SS HE40 802.11ax client devices or to two 1SS HE40 802.11ax DL-MU-MIMO capable client devices simultaneously (max)
    • Two spatial stream Single User (SU) MIMO for up to 287Mbps wireless data rate to individual 2SS HE20 802.11ax client devices or to two 1SS HE20 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)
  • Support for up to 512 associated client devices per radio, and up to 16 BSSIDs per radio
  • Supported frequency bands (country-specific restrictions apply):
    • 2.400 to 2.4835GHz
    • 5.150 to 5.250GHz
    • 5.250 to 5.350GHz
    • 5.470 to 5.725GHz
    • 5.725 to 5.850GHz
  • Available channels: Dependent on configured regulatory domain
  • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
    • Including Zero-Wait DFS (ZWDFS) to accelerate channel changes
  • Supported radio technologies:
    • 802.11b: Direct-sequence spread-spectrum (DSSS)
    • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
    • 802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 16 resource units (for an 80MHz channel)
  • Supported modulation types:
    • 802.11b: BPSK, QPSK, CCK
    • 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension)
    • 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension)
    • 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
  • 802.11n high-throughput (HT) support: HT20/40
  • 802.11ac very high throughput (VHT) support: VHT20/40/80/160
  • 802.11ax high efficiency (HE) support: HE20/40/80/160
  • Supported data rates (Mbps) 1:
    • 802.11b: 1, 2, 5.5, 11
    • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
    • 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)
    • 802.11n (5GHz): 6.5 to 600 (MCS0 to MVC31, HT20 to HT40)
    • 802.11ac: 6.5 to 3,467 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160)
    • 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
    • 802.11ax (5GHz): 3.6 to 4,803 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE160)
  • 802.11n/ac packet aggregation: A-MPDU, A-MSDU
  • Transmit power: Configurable in increments of 0.5 dBm
  • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
    • 2.4 GHz band: +21 dBm (18dBm per chain)
    • 5 GHz band: +24 dBm (18 dBm per chain)
    • Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain.
  • Advanced Cellular Coexistence (ACC) minimizes the impact of interference from cellular networks
  • Maximum ratio combining (MRC) for improved receiver performance
  • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
  • Space-time block coding (STBC) for increased range and improved reception
  • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
  • Transmit beam-forming (TxBF) for increased signal reliability and range
  • 802.11ax Target Wait Time (TWT) to support low-power client devices

1 Ignoring the impact of proprietary data rate extensions and OFDMA resource units.

Wi-Fi antennas

  • AP-514:
    • Four RP-SMA connectors for external dual band antennas (A0 through A3, corresponding with radio chains 0 through 3). Worst-case internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.3dB in 2.4GHz and 1.7dB in 5GHz.
  • AP-515:
    • Four integrated dual-band downtilt omni-directional antennas for 4x4 MIMO with peak antenna gain of 4.2dBi in 2.4GHz and 7.5dBi in 5GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.
      • Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the effective per-antenna pattern is 3.8dBi in 2.4GHz and 4.6dBi in 5GHz.

Additional interfaces

  • E0: HPE SmartRate port (RJ-45, maximum negotiated speed 2.5Gbps)
    • Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX
    • 2.5Gbps speed complies with NBase-T and 802.3bz specifications
    • POE-PD: 48Vdc (nominal) 802.3af/802.3at POE
  • E1: 10/100/1000BASE-T Ethernet network interface (RJ-45)
    • Auto-sensing link speed and MDI/MDX
  • Link aggregation (LACP) support between both network ports for redundancy and increased capacity
  • DC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length
  • USB 2.0 host interface (Type A connector)
    • Capable of sourcing up to 1A / 5W to an attached device
  • Bluetooth 5 and Zigbee (802.15.4) radio
    • Bluetooth: up to 8dBm transmit power (class 1) and -95dBm receive sensitivity
    • Zigbee: up to 8dBm transmit power and -97dBm receive sensitivity
    • Integrated vertically polarized omnidirectional antenna with roughly 30 degrees downtilt and peak gain of 3.5dBi (AP-515) or 4.9dBi (AP-514)
  • Visual indictors (two multi-color LEDs): for System and Radio status
  • Reset button: factory reset, LED mode control (normal/off)
  • Serial console interface (proprietary, micro-B USB physical jack)
  • Kensington security slot

Power sources and power consumption

  • The AP supports direct DC power and Power over Ethernet (POE; on port E0)
  • When both power sources are available, DC power takes priority over POE
  • Power sources are sold separately; see the ordering Information section below for details
  • When powered by DC or 802.3at POE, the AP will operate without restrictions
  • When powered by 802.3af POE and with the IPM feature enabled, the AP will start up in unrestricted mode, but it may apply restrictions depending on the PoE budget and actual power. What IPM restrictions to apply, and in what order, is programmable.
  • Operating the AP with an 802.3af (class 3 or lower) PoE source and IPM disabled is not supported.​
  • Maximum (worst-case) power consumption:
    • DC powered: 16W
    • POE powered (802.3af, IPM enabled): 13.5W
    • POE powered (802.3at/bt): 20.8W
    • All numbers above are without an external USB device connected. When sourcing the full 5W power budget to such a device, the incremental (worst-case) power consumption for the AP is up to 5.7W (PoE powered) or
      5.5W (DC powered).
  • Maximum (worst-case) power consumption in idle mode: 12.6W (PoE) or 9.7W (DC)
  • Maximum (worst-case) power consumption in deep-sleep mode: 5.9W (PoE) or 1.5W (DC)

Mounting details

  • A mounting bracket has been pre-installed on the back of the AP. This bracket is used to secure the AP to any of the Aruba mount kits (sold separately); see the ordering Information section below for details.

Mechanical specifications

  • Dimensions/weight (AP-515; unit, excluding mount bracket):
    • (H) 46mm x (W) 200mm x (D) 200mm (1.8" x 7.9" x 7.9")
    • Weight: 810g (28.5oz)
  • Dimensions/weight (AP-515; shipping):
    • (H) 72mm x (W) 230mm x (D) 220mm (2.8" x 9.1" x 9.1")
    • Weight: 1,010g (35.5oz)

Environmental specifications

  • Operating conditions
    • Temperature: 0°C to +50°C / +32°F to +122°F
    • Humidity: 5% to 93% non-condensing
    • AP is plenum rated for use in air-handling spaces
    • ETS 300 019 class 3.2 environments
  • Storage and transportation conditions
    • Temperature: -40°C to +70°C / -40F to +158°F
    • Humidity: 5% to 93% non-condensing
    • ETS 300 019 classes 1.2 and 2.3 environments


  • Mean Time Between Failure (MTBF): 560,000 hrs (64yrs) at +25°C operating temperature.

Regulatory compliance

  • CE Marked
  • RED Directive 2014/53/EU
  • EMC Directive 2014/30/EU
  • Low Voltage Directive 2014/35/EU
  • UL/IEC/EN 60950
  • EN 60601-1-1, EN60601-1-2
  • Railway Certs (AP-515 Only):
    • EN 50155:2017 – Railway Applications
    • EN 50121-1:2017 – Railway EMC
    • EN 50121-3-2 – Railway EMC
    • EN 50121-4:2016 – Railway Immunity
    • IEC 61373 ed2:2008 – Railway Shock and Vibration
  • For more country-specific regulatory information and approvals, please see your Aruba representative.

Regulatory model numbers

  • AP-514: APIN0514
  • AP-515: APIN0515


  • UL2043 plenum rating
  • Wi-Fi Alliance:
    • Wi-Fi CERTIFIED a, b, g, n, ac
    • Wi-Fi CERTIFIED ax2
    • WPA, WPA2 and WPA3 – Enterprise, Personal
    • WMM, WMM-PS, Wi-Fi Vantage, W-Fi Agile Multiband
    • Wi-Fi Location3
    • Passpoint (release 2)
  • Bluetooth SIG
  • Ethernet Alliance (POE, PD device, class 4)

2 May require software update. Certification effort will be kicked off as soon as the Wi-Fi Alliance starts the program.

3 Not available initially; will require a software upgrade.


  • Aruba’s hardware limited lifetime warranty

Minimum operating system software versions

  • ArubaOS and Aruba InstantOS

Aruba 510 Series Campus Access Points

Part numberDescription
Q9H57AAruba AP-514 (RW) Dual Radio 4x4:4 + 2x2:2 802.11ax External Antennas Unified Campus AP
Q9H62AAruba AP-515 (RW) Dual Radio 4x4:4 + 2x2:2 802.11ax Internal Antennas Unified Campus AP
Q9H67AAruba AP-514 (RW) TAA Dual Radio 4x4:4 + 2x2:2 802.11ax External Antennas Unified Campus AP
Q9H72AAruba AP-515 (RW) TAA Dual Radio 4x4:4 + 2x2:2 802.11ax Internal Antennas Unified Campus AP

GET Aruba 510 Series Access Point Pricing

To receive Aruba 510 Series AP price, please send us a message.