June 20, 2022

Aruba 560EX Series Access Points

Your Preferred Aruba Partner

J&M Eastern Group is a HPE Aruba supplier in Malaysia that specializes in HPE Aruba Access Points. As one of the top HPE Aruba partner and reseller in Malaysia, we carry a wide range of HPE Aruba products to meet your requirements and quickly respond to the demands of your business. Our team is well experienced with Aruba products, solutions and services.

Aruba is the industry leader in wired, wireless and security networking solutions.

Multi-user Efficiency with Wi-Fi 6

The 560EX Series Hazardous Location APs feature Class 1 Division 2 and ATEX Zone 2 certification to operate in hazardous locations like oil and gas and potentially explosive environments – with Wi-Fi 6 to support critical access and IoT functionality.

Ultimate efficiency

Supporting higher speed and higher user densities, the 560EX Series APs maximize performance and efficiency with support for OFDMA and MU-MIMO technologies, enabling the most efficient communication between the client and access point.

IoT and location-ready

Aruba Wi-Fi 6 supports 802.15.4/Zigbee, Bluetooth, and third-party overlays to simplify the deployment and management of IoT services, asset-tracking services, security solutions, and IoT sensors. Ideal for IoT infrequent communications.

Simple and secure access

Enforces built-in policy firewall (layer 7) for each new client on the network and utilizes Aruba ClearPass Policy Manager for centralized policy management. For enhanced security, the 560EX Series APs provide storage of credentials, keys, and booting.

Looking for Aruba supplier in Malaysia? As a leading Aruba partner and Aruba supplier in Malaysia we specialise in Aruba Products: Aruba switches, transceivers, access points, wireless controllers, power injectors and Aruba accessories.

Aruba 560EX Series Hazardous Location Access Points

Entry-level Wi-Fi 6 (802.11ax) for outdoor and hazardous location environments

KEY FEATURES

  • 1.5 Gbps maximum speed (HE80/HE20)
  • Wi-Fi 6 for OFDMA and WPA3
  • IoT-ready Bluetooth 5 and 802.15.4/Zigbee support
  • Dynamic Segmentation and policy-enforcement firewalls
  • AI-powered, Wi-Fi radio frequency RF with AirMatch
  • Air Slice for SLA-grade performance

Technical Specifications

Hardware variants

  • AP-565EX
    • Built-in Omni Directional Antennas
    • 5 GHz Antennas 5.4 dBi
    • 2.4 GHz Antennas 3.2 dBi
    • BLE/802.15.4 Antennas 3.3d Bi
  • AP-567EX
    • Built-in 90°H x 90°V Directional Antennas
    • 5 GHz Antennas 6.8 dBi
    • 2.4 GHz Antennas 7.1 dBi
    • BLE/802.15.4 Antennas 3.0 dBi

Wi-Fi radio specifications

  • AP type:
    • Outdoor Hardened, Wi-Fi 6 dual radio, 5 GHz 2x2 MIMO and 2.4 GHz 2x2 MIMO
  • Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
  • 5GHz:
    • Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with individual 2SS HE80 802.11ax client devices, or with two 1SS HE80 802.11ax MU-MIMO capable client devices simultaneously
  • 2.4GHz:
    • Two spatial stream Single User (SU) MIMO for up to 574 Mbps (287 Mbps) wireless data rate with individual 2SS HE40 (HE20) 802.11ax client devices or with two 1SS HE40 (HE20) 802.11ax MU-MIMO capable client devices simultaneously
  • Up to 256 associated client devices per radio
  • Up to 16 BSSIDs per radio
  • Supported frequency bands (country-specific restrictions apply):
    • 2.400 to 2.4835 GHz
    • 5.150 to 5.250 GHz
  • Maximum EIRP (limited by local regulatory requirements):
    • 2.4 GHz band:
      • 565: 29.2 dBm EIRP
      • 567: 33 dBm EIRP
    • 5 GHz band:
      • 565: 31.4 dBm EIRP
      • 567: 32.7 dBm EIRP
  • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
  • Maximum ratio combining (MRC) for improved receiver performance
  • Cyclic delay/shift diversity (CDD/CSD) to enable the use of multiple transmit antennas
  • Short guard interval for 20-MHz, 40-MHz, and 80-MHz
  • Space-time block coding (STBC) for increased range and improved reception
  • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
  • Transmit beam-forming (TxBF) for increased signal reliability and range

Additional interfaces

  • Maximum (worst-case) power consumption:
    • 15.6W
  • Maximum (worst case) power consumption in idle mode:
    • 4.2W
  • Maximum (worst case) power consumption in deep-sleep mode:
    • 1.7
  • Power sources sold separately
  • Power over Ethernet (PoE+):
    • 802.3at-compliant
  • When powered by 1x 802.3at, there are no restrictions
  • When powered by 1x 802.3af with IPM enabled, the AP will start up in unrestricted mode, but may dynamically apply restrictions depending on the POE budget and actual power. The feature restrictions can be programmed.
  • When powered by 1x 802.3af with IPM disabled, the AP will lower the 2.4Ghz radio to 1x1:1

Power

  • E0: 10/100/1000BASE-T (RJ-45)
    • Auto-sensing link speed and MDI/MDX
    • PoE-PD: 48Vdc (nominal) 802.3at/bt (Class 3 or higher)
    • 802.3az Energy Efficient Ethernet (EEE)
  • Bluetooth 5 and 802.15.4 radio
    • 2.4 GHz
    • Bluetooth 5: up to 8 dBm transmit power and -95 dBm receive sensitivity
    • Zigbee: up to 8 dBm transmit power and -97 dBm receive sensitivity
    • Up to 4 dBm transmit power (class 2) and -91 dBm receive sensitivity
  • Visual indicator (multi-color LED): For system and radio status
  • Reset button: Factory reset (during device power up)
  • USB-C console interface

Mounting

  • AP-270-MNT-V1
  • AP-270-MNT-V2
  • AP-270-MNT-H1
  • AP-270-MNT-H2
  • AP-270-MNT-H3

Mechanical specifications

  • AP-565EX
    • Dimensions/weight (excluding mount):
      • 16.5 cm (W) x 16.5 cm (D) x 11 cm (H)
      • 6.5” (W) x 6.5” (D) x 4.3” (H)
      • 1.03 kg/2.27 lbs
  • AP-567EX
    • Dimensions/weight (excluding mount):
      • 16.5 cm (W) x 16.5 cm (D) x 11 cm (H)
      • 6.5” (W) x 6.5” (D) x 4.3” (H)
      • 1.09 kg/2.4 lbs

Environmental specifications

  • Operating:
    • Temperature: -40° C to +55° C (-40° F to +140° F) with full solar loading
    • Humidity: 5% to 95% non-condensing internal
    • Rated for operation in all weather conditions
  • Storage and transportation:
    • Temperature: -40° C to +70° C (-40° F to +158° F)
  • Operating Altitude: 3,000 m
  • Water and Dust: IP66/67
  • Salt Tolerance: Tested to ASTM B117-07A Salt Spray 200hrs
  • Wind Survival: Up to 165 Mph
  • Shock and Vibration ETSI 300-19-2-4

Regulatory compliance

  • FCC/ISED
  • CE Marked
  • RED Directive 2014/53/EU
  • EMC Directive 2014/30/EU
  • Low Voltage Directive 2014/35/EU
  • UL/IEC/EN 60950
  • EN 60601-1-1, EN60601-1-2
  • For more country-specific regulatory information and approvals, please see your Aruba representative.

Regulatory model numbers

  • AP-565EX: APEX0565
  • AP-567EX: APEX0567

Certifications

  • CB Scheme Safety, cTUVus
  • UL2043 plenum rating
  • Wi-Fi Alliance certified 802.11a/b/g/n/
  • Wi-Fi Alliance certified Wi-Fi 6 (802.11ax)
  • Wi-Fi CERTIFIED™ ac (with Wave 2 features)
  • Passpoint® (Release 2) with ArubaOS and Instant 8.3+
  • Class 1 Division 2 certified
  • ATEX Zone 2 certified

Warranty

  • Aruba’s hardware limited lifetime warranty

Minimum operating system software versions

  • ArubaOS and Aruba InstantOS 8.7.1.0

Aruba 560EX Series Unified Outdoor HazLoc Access Points

Part numberDescription
R4W62AAruba AP-565EX (RW) 802.11ax Dual 2x2:2 Radio Internal Omni Antenna Outdoor HazLoc AP
R4W66AAruba AP-567EX (RW) 802.11ax Dual 2x2:2 Radio Internal Directional Ant Outdoor HazLoc AP

GET Aruba 560EX Series Access Point Pricing

To receive Aruba 560EX Series AP price, please send us a message.