SFP+

Your Preferred Aruba Partner

J&M Eastern Group is a HPE Aruba supplier in Malaysia that specializes in HPE Aruba Transceivers. As one of the top HPE Aruba partner and reseller in Malaysia, we carry a wide range of HPE Aruba products to meet your requirements and quickly respond to the demands of your business. Our team is well experienced with Aruba products, solutions and services.

Aruba is the industry leader in wired, wireless and security networking solutions.

Looking for Aruba supplier in Malaysia? As a leading Aruba partner and Aruba supplier in Malaysia we specialise in Aruba Products: Aruba switches, transceivers, access points, wireless controllers, power injectors and Aruba accessories.

SFP+ optical transceiver modules

SFP+ optical transceiver modules provide a transmission rate of 10.31 Gbps and use LC connectors.

Specifications for SFP+ optical transceiver modules (1)

Product Name (SKU)DOM - Digital Optical Monitoring (4x4 part #)Central wl (nm)Fiber modeFiber diameter (µm)Bandwidth (MHz*km)Transmission distance
HPE X132 10G SFP+ LC SR Transceiver (J9150A)

Aruba 10G SFP+ LC SR 300m MMF XCVR (J9150D)

Aruba 10G I- Tmp SFP+ LC SR 300m MMF XCVR (JL782A)

Aruba 10G SFP+ LC SR 300m MMF TAA XCVR (JL748A)

Yes

(1990-4391, 1990-4635, 1990-4634, 1990-4175)

JL748A 4x4: (1990-4175, 1990-4776)

JL782A 4x4: (1990-4767, 1990-4770)

850MMF50/1254700 (OM4)

2000 (OM3)

500 (OM2)

400

400m (1312.34 ft)

300m (984.25 ft)

82m (269.03 ft)

66m (216.54 ft)

62.5/125200 (OM1)

160

33m (108.27 ft)

26m (85.30 ft)

HPE X132 10G SFP+ LC LRM Transceiver (J9152A)

Aruba 10G SFP+ LC LRM 220m MMF XCVR (J9152D)

Yes (1990-4485)1310MMF50/1251500

500 (OM2)

400

220m (721.78 ft)

220m (721.78 ft)

100m (328.08 ft)

62.5/125200 (OM1)

160

220m (721.78 ft)

220m (721.78 ft)

SMF9/125N/A300m (987.25 ft)
HPE X132 10G SFP+ LC LRM Transceiver (J9152A)

Aruba 10G SFP+ LC LRM 220m MMF XCVR (J9152D)

Yes

(1990-4485)

1310MMF50/125 

500 (OM2)

400

220m (721.78 ft)

220m (721.78 ft)

100m (328.08 ft)

HPE X132 10G SFP+ LC LR Transceiver (J9151A)

Aruba 10G SFP+ LC LR 10km SMF XCVR (J9151D and  J9151E)

Aruba 10G SFP+ LC LR 10km SMF TAA XCVR (JL749A)

Aruba 10G I- Tmp SFP+ LC LR 10km SMF XCVR (JL783A)

Yes

J9151A/J9151D: (1990-4657, 1990-4694)

JL749A: (1990-4751, 1990-4752)

JL783A: (1990 4768,1990-4769)

1310SMF9/125N/A10km (6.21 miles)
HPE X132 10G SFP+ LC ER Transceiver (J9153A)

Aruba 10G SFP+ LC ER 40km SMF XCVR (J9153D)

Yes

(1990-4365, 1990-4656)

1550SMF9/125N/A40km (24.86 miles) on engineered link (less than 11.1dBm loss over the entire link). 30km on standard SMF links.

Specifications for SFP+ optical transceiver modules (2)

 

Product name (SKU)

Optical parameters (dBm)
Transmit powerReceive power
HPE X132 10G SFP+ LC SR Transceiver (J9150A) Aruba 10G SFP+ LC SR 300m MMF XCVR (J9150D) Aruba 10G SFP+ LC SR 300m MMF TAA XCVR (JL748A)

Aruba 10G I-Tmp SFP+ LC SR 300m MMF XCVR (JL782A)

–7.3 to –1–9.9 to +0.5
HPE X132 10G SFP+ LC LRM Transceiver (J9152A) Aruba 10G SFP+ LC LRM 220m MMF XCVR (J9152D)–6.5 to +0.5–6.5 to +1.5
HPE X132 10G SFP+ LC LR Transceiver (J9151A)

Aruba 10G SFP+ LC LR 10km SMF XCVR (J9151D/J9151E) Aruba 10G SFP+ LC LR 10km SMF TAA XCVR (JL749A)

Aruba 10G I-Tmp SFP+ LC LR 10km SMF XCVR (JL783A)

–8.2 to +0.5–14.4 to +0.5
HPE X132 10G SFP+ LC ER Transceiver (J9153A) Aruba 10G SFP+ LC ER 40km SMF XCVR (J9153D)–4.7 to +4–15.8 to –1

Compatibility for the SFP+ optical transceiver module

Product nameSKUMinimum software requiredComments
10G-SR, LR, LRM (J9150A/J9150D, J9151A/J9151D/J9151E, J9152A/J9152D)10G-ER (J9153A/J9153)
2530 Switch SeriesJ9853A, J9854A, J9855A, J9856AAllAllUnlisted models do not have SFP+ ports.
2540 Switch SeriesJL354A, JL355A, JL356A, JL357AAll (J9150A/J9150D and J9151A/J9151D/J9151E only) J9152A/J9152D (LRM) is not supported in any 2540 modelAllJ9152A/J9152D (or any type of 10G LRM technology) is not supported in any 2540 model
2910al Switch SeriesJ9008AAllW.15.07.0002Unlisted models do not have SFP+ ports.
2920 Switch SeriesJ9726A, J9727A, J9728A, J9729A, J9836AAll For use in an installed J9731A Aruba 2920 2-port 10GbE SFP+ Module.
2930F Switch SeriesJL253A, JL254A, JL255A, JL256A, JL258A, JL263A, JL264A, JL558A, JL559AJ9150A/J9150D and J9151A/J9151D/J9151E: All versions

JL748A/JL749A (TAA XCVRs): 16.08.0021 and 16.10.0007 J9152A/J9152D (or any type of 10G LRM technology) is not supported in any 2930F model

AllUnlisted models do not have SFP+ ports. J9152A/J9152D (or any type of 10G LRM technology) is not supported in any 2930F model.
2930M Switch SeriesJL319A, JL320A, JL321A, JL322A, JL323A, JL324AJ9150A/J9150D, J9151A/J9151D/J9151E, J9152A/J9152D:All versions JL748A/JL749A (TAA XCVRs): 16.08.0021 and 16.10.0007AllFor use in an installed JL083A Aruba 3810M/2930M 4SFP+

MACsec Module.

R0M67A, R0M68AJ9150A/J9150D, J9151A/J9151D/J9151E, J9152A/J9152D: WC.16.05.xxxx

JL748A/JL749A (TAA XCVRs): 16.08.0021 and 16.10.0007

WC.16.05
3500yl Switch SeriesJ8692A, J8693A, J9310A, J9311AK.14.50 and laterK.15.02.0004 and laterFor use in an installed J9312A 10GbE 2-port SFP+/2-port CX4 yl Module.
3800 Switch SeriesJ9575A, J9576A, J9573A, J9574A, J9584AAllAllUnlisted models do not have SFP+ ports.
3810M Switch SeriesJL071A, JL072A, JL073A, JL074A, JL076AJ9150A/J9150D, J9151A/J9151D/J9151E, J9152A/J9152D: All versions JL748A/JL749A (TAA XCVRs): 16.08.0021 and 16.10.0007AllFor use in an installed JL083A Aruba 3810M/2930M 4SFP+

MACsec Module

JL075AJ9150A/J9150D, J9151A/J9151D/J9151E, J9152A/J9152D:All versions JL748A/JL749A (TAA XCVRs): 16.08.0021 and 16.10.0007AllFor use in the JL075A SFP+ ports or in an installed JL083A Aruba 3810M/2930M 4SFP+

MACsec Module

4100i Switch SeriesJL817A, JL818AJ9150D, J9151D, J9153D: 10.08.0001 (Commercial Temp)

JL748A/JL749A (TAA XCVRs): 10.08.0001 (Commercial Temp)

JL782A, JL783A: 10.08.0001 (Industrial Temp)

J9152A/J9152D (or any type of 10G LRM technology) is not supported in this Series

J9153D: 10.08.0001 (Commercial Temp)

No Aruba 10G ER Ind Temp xcvr available

Hi Temp warnings will trigger at lower temperatures (~50C)if Commercial Temp vs Industrial Temp transceivers (~70C) are used.

All Third Party transceivers are treated as Commercial Temp, regardless of capability.

5400zl Switch SeriesJ9309AK.14.39K.15.02.0004The J9309A 4-port SFP+ module supports only 10G transceivers.

10G ER (J9153A/D) transceivers are limited to a maximum of two transceivers per J9309A or J9538A modules when used in a 5400zl or 8200zl chassis.

J9538A, J9548A, J9536AK.15.02.0004K.15.02.0004 
5400R Switch SeriesJ9538A, J9548A, J9536AJ9150A/J9150D, J9151A/J9151D/J9151E, J9152A/J9152D: All versions JL748A/JL749A (TAA XCVRs): 16.08.0021 and 16.10.0007All 
J9990A, J9993AJ9150A/J9150D, J9151A/J9151D/J9151E, J9152A/J9152D:KB.15.17 JL748A/JL749A (TAA XCVRs): 16.08.0021 and 16.10.0007KB.15.17 
Aruba 6000 and 6100 Switch SeriesAll models10.06.0001

JL748A/JL749A (TAA XCVRs): 10.06.0130 / 10.07.0010

J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 6100 Series

J9153D 10G ER not supported on the 6100 seriesOnly the listed 4x4 parts are fully supported J9150A/J9150D

  • 1990-4391
  • 1990-4175
  • 1990-4635
  • 1990-4634

J9151A/J9151D

  • 1990-4657
  • 1990-4727
  • 1990-4694

J9151E

  • 1990-4727
  • 1990-4694

J9152A/J9152D (or any type of 10G LRM technology) is not supported on the 6100 Series

6120 Switch Series516733-B21 (6120XG)AllNot supported498358-B21 (6120G/XG) has 1GB SFP and 10G XFP or CX4 ports and does not support these SFP+ transceivers.
6200yl Switch SeriesJ8992AK.14.50K.15.02.0004J8992A fixed SFP ports are 1GB and do not support these SFP+ transceivers.

For use in an installed J9312A 10GbE 2-port SFP+/2-port CX4 yl Module.

Aruba 6200 Switch SeriesAll modelsJ9150A/J9150D and J9151A/J9151D/J9151E: 10.04.1000

JL748A/JL749A (TAA XCVRs): 10.06.0130 / 10.07.0010 J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series

10.04.1000

Only the listed 4x4 parts are fully supported J9153A/J9153D

  • 1990-4365
  • 1990-4656
Only the listed 4x4 parts are fully supported J9150A/J9150D

  • 1990-4391
  • 1990-4175
  • 1990-4635
  • 1990-4634

J9151A/J9151D

  • 1990-4657
  • 1990-4727
  • 1990-4694

J9151E

  • 1990-4727
  • 1990-4694

J9152A/J9152D (or any type of 10G LRM technology) is not supported on the 6200 Series

Aruba 6300 Switch SeriesAll models (M and F) except JL762AJ9150A/J9150D and J9151A/J9151D/J9151E: 10.04.1000

Except JL762A: 10.04.3000 JL748A/JL749A (TAA XCVRs): 10.06.0130 / 10.07.0005

J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series

10.04.0001

J9153A/J9153D

  • 1990-4365
  • 1990-4656
J9150A/J9150D

  • 1990-4391
  • 1990-4175
  • 1990-4635
  • 1990-4634

JL748A

  • 1990-4175
  • 1990-4776

J9151A/J9151D

  • 1990-4657
  • 1990-4727
  • 1990-4694

J9151E

  • 1990-4727
  • 1990-4694

JL749A 4x4:

  • 1990-4751
  • 1990-4752

J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 6300 series

Aruba 6400 ModulesR0X39B, R0X40B R0X41A, R0X42A, R0X43AJ9150A/J9150D and J9151A/J9151D/J9151E: 10.04.1000

JL748A/JL749A (TAA XCVRs): 10.06.0140 and 10.07.0005

J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series

10.04.1000R0X38A/R0X39A/R0X40A

(revision A) are no longer supported for use in the 6400 modules.

J9150A/J9150D

  • 1990-4391
  • 1990-4175
  • 1990-4635
  • 1990-4634

JL748A

  • 1990-4175
  • 1990-4776

J9151A/J9151D

  • 1990-4657
  • 1990-4727
  • 1990-4694

J9151E

  • 1990-4727
  • 1990-4694

JL749A

  • 1990-4751
  • 1990-4752

J9152A/J9152D (or any type of 10G LRM technology) is not supported in any of the 6400 modules.

R0X44A auto-detects the inserted type of transceiver; it does NOT require any "interface groups" like the 8325.

R0X44AJ9150A/J9150D and J9151A/J9151D/J9151E: 10.04.2000

JL748A/JL749A (TAA XCVRs): 10.06.0140 and 10.07.0005

J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series

10.04.2000

J9153A/J9153D

  • 1990-4365
  • 1990-4656
6600 Switch SeriesJ9264A, J9265AK.14.03K.15.02.0004 
J9452AK.14.24K.15.02.0004 
8200zl Switch SeriesJ9309AK.14.39K.15.02.0004The J9309A four-port SFP+ module only supports 10G transceivers.
 J9538A, J9548A, J9536AK.15.02.0004K.15.02.000410G ER (J9153A/D) transceivers are limited to a maximum of two transceivers per J9309A or J9538A modules when used in a 5400zl or 8200zl chassis.
Aruba 8320 48p

10G SFP/SFP+

and 6p 40G QSFP+ Switch

JL479AJ9150A/J9150D and J9151A/J9151D/J9151E: 10.03.0001

JL748A/JL749A (TAA XCVRs): 10.06.0140 and 10.07.0005

J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series

AllOnly the listed 4x4 parts are fully supported.

J9150A/J9150D

  • 1990-4391
  • 1990-4175
  • 1990-4635
  • 1990-4634

JL748A

  • 1990-4175
  • 1990-4776

J9151A/J9151D

  • 1990-4657
  • 1990-4727
  • 1990-4694

J9151E

  • 1990-4727
  • 1990-4694

JL749A

  • 1990-4751
  • 1990-4752

J9152A/J9152D (or any type of 10G LRM technology) is not supported on the 8320 Series.

Aruba 8325 48Y8C SwitchJL635A displayed by CLI (show system)

JL624A - Portto- Power model (FB) JL625A - Power-to- Port model (BF)

J9150A/J9150D and J9151A/J9151D/J9151E: 10.03.0030 JL748A/JL749A (TAA XCVRs): 10.06.0140 & 10.07.0005

J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series

10.03.0030

Only the listed 4x4 parts are fully supported J9153A/J9153D

  • 1990-4365
  • 1990-4656
Only the listed 4x4 parts are fully supported.

J9150A/J9150D

  • 1990-4391
  • 1990-4175
  • 1990-4635
  • 1990-4634

JL748A 4x4:

  • 1990-4175
  • 1990-4776

8325 is only compatible with J9151E or later. Do not attempt to use J9151D or earlier.

J9151E

  • 1990-4727
  • 1990-4694

JL749A 4x4:

  • 1990-4751
  • 1990-4752

J9152A/J9152D (or any type of 10G LRM technology) is not supported in the 8325 switches.

The 8325 requires configuration of "interface groups" (groups of 12 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed). See the Installation Guide for details.

Aruba 8360 Switch Series8360 32Y4C models

JL717A displayed by CLI (show system)

  • JL700A Port-to-Power model
  • JL701A Power-to-Port model

8360 16Y2C models

JL718A displayed by CLI (show system)

  • JL702A Port-to- Power model
  • JL703A Power-to-Port model

8360 24XF2C models

JL722A displayed by CLI (show system)

  • JL710A Port-to- Power model
  • JL711A Power-to-Port model

8360 48Y6C models

JL719C displayed by CLI (show system)

  • JL704C - Port-to-Power model (FB)
  • JL705C - Power-to-Port model (BF)
10.06.0001

JL748A/JL749A (TAA XCVRs): 10.06.0140 and 10.07.0005

J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series

48Y6C models: 10.09.0002

10.06.0001

Only the listed 4x4 parts are fully supported J9153A/J9153D

  • 1990-4365
  • 1990-4656

48Y6C models: 10.09.0002

Only the listed 4x4 parts are fully supported J9150A/J9150D

  • 1990-4391
  • 1990-4175
  • 1990-4635
  • 1990-4634

JL748A

  • 1990-4175
  • 1990-4776

J9151A/J9151D

  • 1990-4657
  • 1990-4727
  • 1990-4694

J9151E

  • 1990-4727
  • 1990-4694

JL749A

  • 1990-4751
  • 1990-4752

J9152A/J9152D (or any type of 10G LRM technology) is not supported on this series. The 8360 32Y4C model requires   configuration of "interface groups" only for ports 1-4 (as group #1) to enable the use of 10G transceivers

/ DACs in the SFP28 ports (Interface Groups default to 25G speed). Ports 1-4 on the 8360 32Y4C model do not support 1G transceivers. All other ports can individually auto-detect the  speed of the inserted xcvr. Not applicable to the 24XF (1G/10G) model.

See the Installation Guide for details.

Aruba 8400X modulesJL363A, JL687AFor JL363A 10G module: J9150A/J9150D and J9151A/J9151D/J9151E, J9152A/J9152D: 10.00.0001 JL748A/JL749A (TAA XCVRs): 10.06.0140 and 10.07.0005

10G LRM technology is supported only on the JL363A module

For JL687A 25G module: J9150A/J9150D and J9151A/J9151D/J9151E: 10.04.2000

JL748A/JL749A (TAA XCVRs): 10.07.0005

J9152A/J9152D (or any type of 10G LRM technology) is not supported in the JL687A module.

JL363A: All

JL687A: 10.04.2000

Only the listed 4x4 parts are fully supported.

J9150A/J9150D

  • 1990-4391
  • 1990-4175
  • 1990-4635
  • 1990-4634

JL748A

  • 1990-4175
  • 1990-4776

J9151E

  • 1990-4727
  • 1990-4694

JL749A

  • 1990-4751
  • 1990-4752

JL363A module supports J9152A/J9152D

  • 1990-4485

JL687A module does NOT support J9152A/J9152D (or any type of 10G LRM technology).

The JL687A module requires  configuration of "interface groups" (groups of 4 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed). See the Installation Guide for details.

Aruba 10000 48Y6C modelsR8S96A displayed by CLI (show system)

  • R8P13A - 48Y6C FB bundle
  • R8P14A - 48Y6C BF bundle
All 10000 models: J9150D: 10.09.0010

J9152A/J9152D (or any type of 10G LRM technology) is not supported in this series

 Only the listed 4x4 parts are fully supported J9150A/J9150D

1990-4391

1990-4175

1990-4635

1990-4634

J9152A/J9152D (or any type of 10G LRM technology) is not supported on this series.

10G SFP+ copper transceiver modules

Specifications for SFP+ copper transceiver modules

Product name (SKU)Transmission distanceData rateCable typeConnector type
Aruba 10GBASE-T SFP+ RJ45 30m Cat6A XCVR (JL563A)30 m (98.43 ft)10GSTP Cat6A**RJ-45

Compatibility for SFP+ copper transceiver modules

Product nameSKUMinimum software required (JL563A)Comments
Aruba 4100i Switch SeriesJL817A, JL818ANot supportedNot supported
Aruba 6000 and 6100 Switch SeriesAll modelsNot supportedNot supported
Aruba 6200 Switch SeriesAll models10.04.1000JL563A does not support flow control and only operates at 10G speed (does not auto-negotiate to 1G)
Aruba 6300 Switch SeriesAll models M and F10.04.0001JL563A can be used in all SFP+ or SFP56 ports; no quantity limit.

JL563A does not support flow control and only operates at 10G speed (does not auto-negotiate to 1G).

Aruba 6400 ModulesR0X39B, R0X40B, R0X41A, R0X42A, R0X43A10.04.1000R0X39A/R0X40A (revision A) are no longer supported for use in the 6400 series

JL563A can be used in all SFP+, SFP28, or SFP56 ports; no quantity limit.

JL563A does not support flow control and only operates at 10G speed (does not auto-negotiate to 1G).

R0X44A auto-detects the inserted type of transceiver; it does NOT require any "interface groups" like the 8325.

R0X44A10.04.2000
Aruba 8320 48p 10G SFP/SFP+ and 6p 40G QSFP+ SwitchJL479A10.01.0011JL563A does not support flow control and only operates at 10G speed (does not auto-negotiate to 1G). It is only supported in ports 1 – 12. Use in any other port generates an incompatible interface error (meaning the port does not support the use of this transceiver); move to a supported port. A maximum of 12 JL563A transceivers can be used in a switch.
Aruba 8325 48Y8CJL635A displayed by CLI (show system)

  • JL624A - Port-to- Power model (FB)
  • JL625A - Power-to-Port model (BF)
10.03.0030JL563A does not support flow control and only operates at 10G speed (does not auto-negotiate to 1G).

A maximum of 12 JL563A transceivers can be used in a switch.

It is only supported in the top two rows, ports 1 - 17. It is disallowed in ports 3, 6, 9, 12, and 15. Use in any other port generates an incompatible interface error (meaning the port does not support the use of this transceiver); move to a supported port.

The 8325 requires configuration of "interface groups(groups of 12 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed).

See the Installation Guide for details.

Aruba 8360 Switch Series8360 32Y4C models JL717A displayed by CLI (show system)

  • JL700A Port-to- Power model
  • JL701A Power-to- Port model

8360 16Y2C models JL718A displayed by CLI (show system)

  • JL702A Port-to- Power model
  • JL703A Power-to-Port model

8360 24XF2C models JL722A displayed by CLI (show system)

  • JL710A Port-to-Power model
  • JL711A Power-to-Port model

8360 48Y6C models JL719C displayed by CLI (show system)

  • JL704C Port-to-Power model (FB)
  • JL705C Power-to-Port model (BF)
JL717A, JL718A, JL722A: 10.06.0001

JL719C: 10.09.0002

JL563A does not support flow control and only operates at 10G speed (does not auto-negotiate to 1G).

JL563A transceivers can be used in all SFP or SFP28 ports in the 8360 switch (unlike the 8320 & 8325).

The 8360 32Y4C and 48Y6C models require configuration of "interface groups" only for ports 1-4 (as group #1) to enable the use of 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed). Ports 1-4 on the 8360 32Y4C and 48Y6C models do not support 1G transceivers. All other ports can individually auto-detect the speed of the inserted xcvr. Not applicable to the 24XF (1G/10G) model.

See the Installation Guide for details.

Aruba 8400X ModulesJL363A JL687A10.00.0018

10.04.2000

JL563A does not support 1G operation; only 10G. It is only supported in ports 1 - 12. A maximum of 12 JL563A transceivers can be used in the JL363A module.

The JL687A 32p 25G module can support the use of the JL563A transceiver in all 32 ports.

The JL687A module requires configuration of "interface groups" (groups of 4 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed).

See the Installation Guide for details.

Aruba 10000 48Y6C

models

R8S96A displayed by CLI (show system)

  • R8P13A - 48Y6C FB bundle
  • R8P14A - 48Y6C BF bundle
All 10000 models: JL563A is locked out of being used in this seriesNot supported even with UT-mode The JL563A (10GBase-T) transceiver is locked out of use in this series.

SFP+ DAC cables

Specifications for SFP+ DACs

Product name (SKU)Cable lengthData rate
HPE X242 10G SFP+ to SFP+ 1m DAC Cable (J9281B)

Aruba 10G SFP+ to SFP+ 1m DAC Cable (J9281D)

1 m (3.28 ft)10 Gbps
HPE X242 10G SFP+ to SFP+ 3m DAC Cable (J9283B)

Aruba 10G SFP+ to SFP+ 3m DAC Cable (J9283D)

3 m (9.84 ft)
HPE X242 10G SFP+ to SFP+ 7m DAC Cable (J9285B)

Aruba 10G SFP+ to SFP+ 7m DAC Cable (J9285D)

7 m (22.97 ft)

Specifications for HPE SFP+ DACs (from HPE Server Products)

Product name (SKU)Cable lengthData rate
HPE BLc 10G SFP+ SFP+ 3m DAC Cable (487655-B21)3m (9.84 ft) 

10 Gbps

HPE BLc 10G SFP+ SFP+ 5m DAC Cable (537963-B21)5m (16.40 ft)

(AOS-Switch) Compatibility for the SFP+ DACs (and specifics for HPE Server cables)

Product nameSKUMinimum software required (J9281B/J9281D, J9283B/J9283D, J9285B/J9285D)Comments
2530 Switch SeriesJ9853A, J9854A, J9855A, J9856AAllUnlisted models do not have SFP+ ports.
2540 Switch SeriesJL354A, JL355A, JL356A, JL357AAll (J9281B/J9281D and J9283B/J9283D only. See comments for exception)J9285B/J9285D or any type of 7m DAC is not supported in any of these series.
2910al Switch SeriesJ9145A, J9146A, J9147A, J9148AW.14.28For use in the J9008A 2-port 10GbE SFP+ al module.
2920 itch SeriesJ9726A, J9727A, J9728A, J9729A, J9836AAllThe SFP ports on the models listed do not support these 10G SFP+ cables. For use in an installed J9731A Aruba 2920 2-port 10GbE SFP+.
2930F Switch SeriesJL253A, JL254A, JL255A, JL256A, JL258A, JL263A, JL264A, JL558A, JL559AAll (J9281B/J9281D and J928

3B/J9283D only. See comment for exception)

Unlisted models do not have 10G SFP+ports. J9285B/J9285D or any type of 7m DAC is not supported in any of these series.
2930M Switch SeriesJL319A, JL320A, JL321A, JL322A, JL323A, JL324AAllFor use in an installed JL083A Aruba 3810M/2930M 4SFP+

MACsec Module J9285B/9285D (7m DAC) is supported in all 2930M models.

3500yl Switch SeriesJ8692A, J8693A, J9310A, J9311AK.14.50For use in an installed J9312A 10GbE 2-port

SFP+/2-port CX4 yl Module.

3800 Switch SeriesJ9575A, J9576A, J9573A, J9574A, J9584AAllUnlisted models not do not have SFP+ ports.
3810M Switch SeriesJL071A, JL072A, JL073A, JL074A, JL076AAllFor use in an installed JL083A Aruba 3810M/2930M 4SFP+ MACsec Module.
JL075AAllFor use in the JL075A SFP+ ports or used in an installed JL083A Aruba 3810M/2930M 4SFP+ MACsec Module.
5400zl Switch SeriesJ9309AK.14.39The J9309A 4-port SFP+ module only supports 10G transceivers.
J9538A, J9548A, J9536AK.15.02.0004
5400R Switch SeriesJ9538A, J9548A, J9536AAll 
J9990A, J9993AKB.15.17 
6120 Switch Series516733-B21All 
6200yl Switch SeriesJ8992AK.14.50J8992A fixed SFP ports are 1GB and do not support these SFP+ copper cables. For use in an installed J9312A 10GbE 2-port SFP+/2-port CX4 yl Module.
6600 Switch SeriesJ9264A, J9265A, J9452AK.14.32 
8200zl Switch SeriesJ9309AK.14.39The J9309A 4-port SFP+ module only supports 10G transceivers.
J9538A, J9548A, J9536AK.15.02.0004 

(AOS-CX) Compatibility for the SFP+ DACs (and specifics for HPE Server cables)

 

Product name

 

SKU

Minimum software required (J9281D, J9283D, J9285D, 487655- B21, 537963-B21) 

Comments

Aruba 4100i Switch SeriesJL817A, JL818AJ9281D, J9283D: 10.08.0001,(Commercial Temp)

487655-B21, 537963-B21: Not supported

J9285D (7m) Not Supported nor any type of 7m DAC.

Hi Temp warnings will trigger at lower temperatures (~50C)if Commercial Temp vs Industrial Temp transceivers (~70C) are used. All Third Party transceivers are treated as Commercial Temp, regardless of capability.

No Industrial Temp 10G DACs available

Aruba 6100 Switch SeriesAll modelsJ9281B/J9281D, J9283B/J9283D: not supported

487655-B21, 537963-B21: not supported

J9285B/J9285D or any type of 7m DAC technology is not supported in any of these series.
Aruba 6200 Switch SeriesAll modelsJ9281B/J9281D and J9283B/J9283D only.

See comment for exception): 10.04.1000

487655-B21and 537963-B21: not supported

Only the listed 4x4 parts are fully supported:

J9281B/J9281D

  • 8121-1151
  • 8121-1300

J9283B/J9283D

  • 8121-1152
  • 8121-1298

J9285B/J9285D or any type of 7m DAC is not supported any 6200 model.

Aruba 6300 Switch SeriesAll models M and FJ9281B/J9281D and J9283B/J9283D only.

See comment for exception): 10.04.0001

487655-B21 and 537963-B21: 10.08.0001 for 6300 select SKUs JL658A (all ports), JL663A, JL762A

Only the listed 4x4 parts are fully supported

J9281B/J9281D

  • 8121-1151
  • 8121-1300

J9283B/J9283D

  • 8121-1152
  • 8121-1298

J9285B/J9285D or any type of 7m DAC is not supported in any 6300 model.

Aruba 6400 ModulesR0X39B, R0X40B R0X41A, R0X42A,R0X43AJ9281B/J9281D and J9283B/J9283D only.

See comment for exception): 10.04.1000

487655-B21 and 537963-B21: 10.08.0001

R0X39A/R0X40A (revision A) are no longer supported for use in the 6400 series.

J9281B/J9281D

  • 8121-1151
  • 8121-1300

J9283B/J9283D

  • 8121-1152
  • 8121-1298

J9285B/J9285D or any type of 7m DAC is not supported in any 6400 modules.

R0X44A auto-detects the inserted type of transceiver; it does NOT require any "interface groups" like the 8325.

R0X44AJ9281B/J9281D and

J9283B/J9283D only. See comment for exception): 10.04.2000

487655-B21 and 537963-B21: not supported

Aruba 8320 48p 10G SFP/SFP+ and 6p 40G QSFP+ SwitchJL479AJ9281B/J9281D and J9283B/J9283D only.

See comment for exception): 10.00.0006

487655-B21 and 537963-B21: 10.04.1000

Only the following 4x4 part numbers are supported:

J9281D

  • 8121-1151
  • 8121-1300

J9283D:

  • 8121-1152
  • 8121-1298

J9285B/J9285D or any type of 7m DAC is not supported in the 8320 models.

Aruba 8325 48Y8C SwitchJL635A displayed by CLI (show system)

  • JL624A - Port-to- Power model (FB)
  • JL625A - Power-to-Port model (BF)
J9281B/J9281D and J9283B/J9283D only.

See comment for exception): 10.02.0001

487655-B21 and 537963-B21: 10.04.1000

Only the following 4x4 part numbers are supported: J9281D:

  • 8121-1151
  • 8121-1300

J9283D:

  • 8121-1152
  • 8121-1298

J9285B/J9285D or any type of 7m DAC is not supported in the 8325 models.

487655-B21 and 537963- B21:

The 8325 requires configuration of "interface groups" (in groups of 12 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (Interface Groups default to 25G speed).

See the Installation Guide for details.

Aruba 8360 Switch Series8360 32Y4C models JL717A displayed by CLI (show system)

  • JL700A Port-to- Power model
  • JL701A Power-to-Port model

8360 16Y2C models JL718A displayed by CLI (show system)

  • JL702A Port-to- Power model
  • JL703A Power-to-Port model

8360 24XF2C models JL722A displayed by CLI (show system)

  • JL710A Port-to- Power model
  • JL711A Power-to- Port model

8360 48Y6C models JL719C displayed by CLI (show system)

  • JL704C Port-to- Power model (FB)
  • JL705C Power-to-Port model (BF)
JL717A, JL718A, and JL722A: J9281B/J9281D and J9283B/J9283D only.

See comment for exception: 10.06.0001

487655-B21 and 537963-B21: 10.06.0001

JL719C: J9281B/J9281D and J9283B/J9283D only.

See comment for exception: 10.09.0002

487655-B21 and 537963-B21: 10.09.0002

Only the following 4x4 part numbers are supported: J9281B/J9281D:

  • 8121-1151
  • 8121-1300

J9283B/J9283D:

  • 8121-1152
  • 8121-1298

J9285B/J9285D or any type of 7m DAC is not supported in the 8360 models.

487655-B21 and 537963- B21:

The 8360 32Y4C and 48Y6C models require configuration of "interface  groups"  only for ports 1-4 (as group #1) to enable the use of 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed). Ports 1-4 on the 8360 32Y4C model do not support 1G transceivers. All other ports can individually auto-detect the speed of the inserted xcvr. Not applicable to the 24XF (1G/10G) model.

See the Installation Guide for details.

Aruba 8400X modulesJL363AJ9281D, J9283D, J9285D: 10.00.0003

487655-B21and 537963-B21: 10.06.0001

Only the following 4x4 part numbers are supported:

J9281B/J9281D:

  • 8121-1151,
  • 8121-1300

J9283B/J9283D:

  • 8121-1152,
  • 8121-1298

J9285B/J9285D:

  • 8121-1154,
  • 8121-1305
  • 8121-1724

JL687A 32p 25G module requires configuration of "interface groups" (groups of 4 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (Interface Groups default to 25G speed).

See the 8400 Installation Guide for details.

JL687AJ9281D, J9283D, J9285D: 10.04.2000

487655-B21and 537963-B21: 10.06.0001

Aruba 10000 Switch SeriesR8S96A displayed by CLI (show system)

  • R8P13A - 48Y6C FB bundle
  • R8P14A - 48Y6C BF bundle
J9281D and J9283D only.

See comment for exception): 10.09.0010

487655-B21 and 537963-B21: 10.09.0010

Only the following 4x4 part numbers are supported: J9281D:

  • 8121-1151
  • 8121-1300

J9283D:

  • 8121-1152
  • 8121-1298

J9285D or any type of 7m DAC is not supported in the 10000 models.

GET Aruba SFP+ Transceiver Pricing

To receive Aruba SFP+ Transceiver price, please send us a message.