Introduction

Empowering Core Layer and Edge Services with Higher Speeds and Scales

Cisco Catalyst 9600 Series Switches are purpose-built for resiliency at scale with the industry’s most comprehensive security and allows your business to grow at the lowest total operational cost. Built upon the foundation of the Catalyst 9000, the Catalyst 9600 Series offers scale and security when always-on is a must.

As a foundational building block for the Cisco Digital Network Architecture, the Catalyst 9600 Series switch help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation, and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

Catalyst 9600 Series Switches provide security features that protects the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP and Silicon1 ASIC technologies, Catalyst 9600 Series switches give you what you need now with investment protection on future innovations.

As the industry’s first purpose-built 40,100, 200 and 400 Gigabit Ethernet line of modular switches targeted for the enterprise campus, Catalyst 9600 Series switches deliver unmatched table scale (MAC, route, and Access Control List [ACL]) and buffering for enterprise applications. The Cisco Catalyst 9606R chassis is hardware ready to support a wired switching capacity of up to 25.6 Tbps, with up to 6.4 Tbps of bandwidth per slot.

Cisco Catalyst 9600 Series switches support granular port densities that fit diverse campus needs, including nonblocking 40, 100, 200 and 400 Gigabit Ethernet (GE) Quad Small Form Factor Double Density (QSFP-DD), 40 and 100 Gigabit Ethernet (GE) Quad Small Form-Factor Pluggable (QSFP+, QSFP28); 1, 10, 25, and 50 GE Small Form-Factor Pluggable Plus (SFP, SFP+, SFP28, SFP56); 10G Multigigabit Ethernet (GE) (10G/5G/2.5G/1G/100M/10M) RJ45 copper ports.

The switches also support advanced routing and infrastructure services (such as, industry-standard BGP EVPN VXLAN, Multiprotocol Label Switching [MPLS] Layer 2 and Layer 3 VPNs, Multicast VPN [MVPN], and Network Address Translation [NAT]); Cisco Software- Defined Access capabilities (such as a host tracking database, cross-domain connectivity, and VPN Routing and Forwarding [VRF]-aware Locator/ID Separation Protocol [LISP]); and network system virtualization with Cisco StackWise virtual technology that are critical for their placement in the campus core. The Cisco Catalyst 9600 Series also supports foundational high-availability capabilities such as patching, Cisco Nonstop Forwarding with Stateful Switchover (NSF/SSO), redundant platinum-rated (2KW) or titanium-rated (3KW) power supplies, and fans, while supporting a wide array of optics.

The foundation of Software-Defined Access

The enterprise network lies at the heart of digital transformation. A network that is open, programmable, integrated, and secure maximizes business agility, allowing new business opportunities to be pursued and captured. The Cisco Networking Cloud with Software-Defined Access (SD-Access) is the network fabric that powers business.

Cisco SD-Access is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. SD-Access enables policy-based automation from edge to cloud with foundational capabilities.

Product overview

Cisco Catalyst 9600 Series Chassis

  • Hardware ready to support up to 25.6 Tbps in wired switching capacity, with up to 6.4 Tbps bandwidth per slot.
  • 25.6 Tbps wired switching capacity unleashed with Cisco Catalyst 9600 Series Supervisor Engine 2. Up to 9.6 Tbps in wired switching capacity, with 3 Bpps of forwarding performance with the Cisco Catalyst 9600 Series Supervisor Engine 1.
  • System capable of supporting (future) up to 32 ports of 400G Gigabit Ethernet QSFP-DD ports. The system supports up to 8 non-blocking 400 Gigabit Ethernet QSFP-DD ports supported with current generation Line Cards with the Cisco Catalyst 9600 Series Supervisor Engine 2.
  • Up to 48 nonblocking 100 Gigabit Ethernet QSPF28 ports with the Cisco Catalyst 9600 Series Supervisor Engine 1, and up to 128 nonblocking 100 Gigabit Ethernet QSPF28 ports with the Cisco Catalyst 9600 Series Supervisor Engine 2.
  • Up to 128 nonblocking 40 Gigabit Ethernet QSPF28 ports with the Cisco Catalyst 9600 Series Supervisor Engine 2 and up to 96 nonblocking 40 Gigabit Ethernet QSFP+ ports with the Cisco Catalyst 9600 Series Supervisor Engine 1.
  • Up to 256 nonblocking 50G/25G/10G Gigabit Ethernet QSPF56 ports with the Cisco Catalyst 9600 Series Supervisor Engine 2 and up to 192 nonblocking 25 Gigabit Ethernet /10 Gigabit Ethernet SFP28/SFP+ ports with the Cisco Catalyst 9600 Series Supervisor Engine 1.
  • Up to 192 non-blocking 10G multigigabit (10 Gigabit Ethernet / 5 Gigabit Ethernet / 2.5 Gigabit Ethernet / 1 Gigabit Ethernet / 100 Megabit / 10 Megabit) RJ45 copper ports with the Cisco Catalyst 9600 Series Supervisor Engine 1. Supervisor Engine 2 only supports speeds at and above 10 Gbps1.
  • Platinum-rated (2KW) or Titanium-rated (3KW) AC power supplies.
  • Platinum-rated (2KW) DC power supplies.

1 C9600X-SUP-2 only supports SFP-1G-SX/LH optics for 1Gbps.

Figure 1.            

Cisco Catalyst 9606R Chassis

Cisco IOS XE

Cisco IOS XE Software opens a completely new paradigm in network configuration, operation, and monitoring through network automation. Cisco’s automation solution is open, standards-based, and extensible across the entire lifecycle of a network device. The various automation mechanisms are outlined below.

  • Simplified Campus Automation is designed to optimize the discovery and configuration of devices in your network with a more streamlined simple and easy-to-use automation tool. With features such as simplified discovery, IT can discover devices within the network within just a few steps. Also available is a more streamlined GUI that provides a better simplified view of switch configurations and software details on a port-by-port basis.
  • Automated Device Provisioning is the ability to automate the process of upgrading software images and installing configuration files on Cisco Catalyst switches when they are being deployed in the network for the first time. Cisco provides turnkey solutions such as Plug and Play and Preboot Execution Environment (PXE) that enable an effortless and automated deployment.
  • API-driven configuration is available with modern network switches such as Cisco Catalyst 9600 Series switches. It supports a wide range of automation features and provides robust open APIs over NETCONF and RESTCONF using YANG data models for external tools, both off the shelf and custom built, to automatically provision network resources.
  • Granular visibility enables model-driven telemetry to stream data from a switch to a destination. The data to be streamed is identified through subscription to a data set in a YANG model. The subscribed data set is streamed to the destination at specified intervals. Additionally, Cisco IOS XE enables the push model. It provides near-real-time monitoring of the network, leading to quick detection and rectification of failures.
  • Seamless software upgrades and patching supports OS resilience. On Cisco Catalyst 9600 Series switches Cisco IOS XE supports hot patching without reboot, which provides fixes for critical bugs and security vulnerabilities between regular maintenance releases. This support lets you add patches without having to wait for the next maintenance release.
  • Trustworthy solutions built with Cisco Trust Anchor Technologies provide a highly secure foundation for Cisco products. With Cisco Catalyst 9600 Series switches, these technologies enable hardware and software authenticity assurance for supply chain trust and strong mitigation against man-in-the-middle attacks that compromise software and firmware. Trust Anchor capabilities include image signing, Secure Boot, and Cisco Trust Anchor module.

Platform benefits

Table 1.        Platform Benefits of the Cisco Catalyst 9600 and 9600X

ModelCatalyst 9600 SUP-1Catalyst 9600X SUP-2
Resiliency and High Availability
Software Maintenance Upgrade (SMU)YesYes
Cisco StackWise VirtualYesYes
Cisco StackWise Virtual (QuadSup RPR)YesNo2
Stateful Switchover (SSO)Yes (2 SUP, SVL)Yes (2 SUP, SVL)
In-Service Software Upgrade (ISSU)Yes (2 SUP, SVL)Yes (2 SUP, SVL)
Graceful Insertion and Removal (GIR)YesYes
MKA High AvailabilityYesYes1
Enterprise Security
Trustworthy SolutionsYesYes
Image SigningYesYes
Secure BootYesYes
Cisco Trust Anchor ModuleYesYes
MACsec Encryption (256-bit AES-GCM)YesYes
Cisco WAN MACsec (256-bit AES-GCM)NoYes4
Object-Group ACLs (IPv4/IPv6)YesYes3
Enterprise QoS
Modular QoS CLI (MQC)YesYes
Strict Priority QueuingYesYes
Class/Color-aware QueuingYes (WFQ)Yes (VoQ)
Policing/MeteringYesYes
Shaping/BandwidthYesYes
Hierarchical QoSYes (2-level)Yes (2-level)
IP Routing
Routing Information Protocol version 2 (RIPv2), and next generation (RIPng)YesYes
Open Shortest Path First version 2 (OSPFv2), and OSPFv3YesYes
Enhanced Interior Gateway Routing Protocol (EIGRP), and EIGRPv6YesYes
Intermediate System-to-Intermediate System Version 4
(IS-ISv4)
YesYes
Border Gateway Protocol version 4 (BGPv4), and BGPv6YesYes
Protocol-Independent Multicast (PIM) Sparse-Mode (PIM- SM)YesYes
Protocol-Independent Multicast (PIM) Source- Specific Mode (PIM-SSM)YesYes
Bidirectional PIM (BIDIR-PIM)YesNo2
IPv6 routingYesYes
L3 Routed Sub-InterfacesYesYes
Multi-Protocol Label Switching (MPLS)
MPLS L3 VPNYesYes
Ethernet over MPLS (EoMPLS)YesYes
Virtual Private LAN Service (VPLS)YesNo2
MPLS over GREYesNo2
MPLS Traffic-Engineering (MPLS-TE)YesYes
BGP Ethernet VPN (EVPN) VXLAN
Fabric Spine, Leaf and Border SupportYesYes
L2/L3 Virtual Network Interface (VNI)YesYes
Distributed Anycast Gateway (Symmetric IRB)YesYes
Centralized Gateway (Asymmetric IRB)YesNo2
ESI Multi-Home SupportYesNo2
Tenant Routed Multicast (IPv4/IPv6)YesYes
L3 Border Handoff: Multi-VRF, MPLS, L3VPNYesYes
L2 Border Handoff: VPLS, L2VPNYesNo2
Software-Defined Access (SD-Access)
Virtual eXtensible LAN (VXLAN)YesYes
L2 Virtual Network Interface (VNI)YesYes
L3 Virtual Network Interface (VNI)YesYes
SDA Control-PlaneYesYes
SDA BorderYesYes
SDA Layer 2 BorderYesNo
SDA EdgeNoNo
Flexible NetFlow (FNF)
FNF IPv4 flow recordsYesYes1 (software)
FNF IPv6 flow recordsYesYes1 (software)
FNF samplerYesYes1
FNF data exportYesYes1
NetFlow version 9 (NFv9) exportYesYes1
IPFIX exportYesYes1
Programmability
Simplified Campus AutomationYesYes
NETCONFYesYes
RESTCONFYesYes
gNMI/gNOIYesYes
YANG modelsYesYes
ZTP/PnPYesYes
Smart Operations
Bluetooth Wireless UIYesYes
RFID tagsYesYes
Blue beaconYesYes
Out-of-Band ManagementYesYes

1 C9600X models: minimum IOS XE software release 17.8.1.

2 C9600X models: feature is not available at FCS, but it is hardware capable.

3 C9600X models: Object Group ACLs are supported only in the ingress direction.

4 Requires HSEC Key.

Cisco Catalyst 9600 Series Chassis

Cisco Catalyst 9600 Series switches offers one chassis option, two supervisor options, and multiple line-card options. It provides a common architecture that can scale up to 192 10 Gigabit or 25 Gigabit Ethernet ports. The Cisco Catalyst 9600 Series redundant chassis offer High Availability (HA) by supporting 1 + 1 redundant supervisor engines with full-image In-Service Software Upgrades (ISSU). NSF/SSO and ISSU help ensure continuous packet forwarding during supervisor engine switchover to enable HA for business-critical applications.

The Cisco Catalyst 9600 Series chassis is enterprise optimized, with efficient side-to-side airflow and full front accessibility for all removable components, including supervisors, line cards, power supplies, and fan tray. The chassis also supports optional rear accessibility for the fan tray to enable efficient cable management. The Cisco Catalyst 9600 Series chassis, supervisor, line cards, power supply, and fan tray have embedded RFID tags that facilitate easy asset and inventory management using commercial RFID readers.

Table 2.        Chassis Features

FeatureCisco Catalyst 9606R chassis
Total number of slots6
Line Card slots4
Supervisor Engine slots2
Dedicated Supervisor Engine slot numbers3 and 4
Supervisor Engine RedundancyYes
Supervisor Engines SupportedC9600-SUP-1, C9600X-SUP-2
Maximum bandwidth scalability per Line Card slot6.4 Tbps (3.2Tbps full-duplex) with C9600X-SUP-2

2.4 Tbps (1.2Tbps full-duplex) with C9600-SUP-1

Number of Power Supply bays4
Minimum number of Power Supplies21
Power Supplies supported3000W AC, 2000W AC, and 2000W DC
Number of Fan-tray bays1

1 Fully loaded C9606R chassis, Minimum 3 power supplies required if input voltage is 110V

Supervisor configuration

Cisco Catalyst 9600 Series switches offers an industry-leading supervisor engine built for secure networks, IoT applications, next-generation mobility, and cloud adoption. Supervisor Engine 1 is built with the latest UADP ASIC, with its programmable pipeline and template-based, configurable allocation of Layer 2, Layer 3, forwarding, ACLs and QoS entries, making it ready for next-generation technologies.

The following table lists the maximum bandwidth per slot.

Table 3.        Supervisor Engine 1 maximum bandwidth per slot

FeatureCisco Catalyst 9600 Series Supervisor Engine 1Cisco Catalyst 9600X Series Supervisor Engine 2
Cisco Catalyst C9606R Chassis2.4 Tbps per slot6.4 Tbps per slot

The following table lists the minimum software requirements for the Cisco Catalyst 9600 Series Supervisor Engine 1.

Table 4.        Supervisor Engine 1 minimum software requirements

ChassisSupervisor EngineMinimum Software Requirement
Cisco 9606RCisco Catalyst 9600 Series Supervisor Engine 1Cisco IOS XE Software Release 16.11.1
Cisco Catalyst 9600X Series Supervisor Engine 2Cisco IOS XE Software Release 17.7.1

Line Card Options

Cisco Catalyst 9600 Series switches offers the ability to mix and match a range of line cards to support numerous cores and aggregation deployments. Supported line cards are listed in the following tables by part number.

Table 5.        Line Cards compatible with Catalyst 9600 Supervisor Engine 1

Product NumberDescriptionMinimum Software Requirement
C9600-LC-24CCisco Catalyst 9600 Series 24-port 40GE/12- Port 100GECisco IOS XE Software Release 16.11.1
C9600-LC-48YLCisco Catalyst 9600 Series 48-port 25GE/10GE/1GECisco IOS XE Software Release 16.11.1
C9600-LC-48TXCisco Catalyst 9600 Series 48-port RJ45 Copper - 10GE/5GE/2.5GE/1GE/100Mbps/10MbpsCisco IOX XE Software Release 17.1.1
C9600-LC-48SCisco Catalyst 9600 Series 48-Port 1GECisco IOX XE Software Release 17.2.1
C9600-LC-40YL4CDC9600-LC-40YL4CD Cisco Catalyst 9600 Series Combo line card

40 ports 1/10/25GE SFP and 2 ports 40/100GE QSFP Uplinks

Cisco IOX XE Software Release 17.7.1

Table 6.        Line Cards compatible with Catalyst 9600 Supervisor Engine 2

Product NumberDescriptionMinimum Software Requirement
Cisco Catalyst 9600 Series Line Cards
C9600-LC-24CCisco Catalyst 9600 Series 24-port 40GE/100GE line cardCisco IOS XE Software Release 17.7.1
C9600-LC-48YLCisco Catalyst 9600 Series 48-port 25GE/10/1GE1 SFP28 line cardCisco IOS XE Software Release 17.7.1
C9600-LC-48TXCisco Catalyst 9600 Series 48-port RJ45 Copper - 10GE2 line cardCisco IOX XE Software Release 17.7.1
C9600-LC-40YL4CDCisco Catalyst 9600 Series Combo line card

40 ports 50/25/10/1GE1 SFP56

2 ports 200/100/40GE QSFP56 uplinks

2 ports 400/2003/100/40GE QSFP-DD uplinks

Cisco IOX XE Software Release 17.7.1
C9600X-LC-32CDCisco Catalyst 9600 Series Combo line card

30 ports 100/40GE QSFP28

2 ports 400/2003/100/40GE QSFP-DD

Cisco IOS XE Software Release 17.9.1
C9600X-LC-56YL4CCisco Catalyst 9600 Series Combo line card

56 ports 50/25/10/1GE1 SFP56

4 ports 100/40GE QSFP28 uplinks

Cisco IOX XE Software Release 17.13.1

1 C9600X-SUP-2 only supports SFP-1G-SX/LH optics for 1Gbps.

2 Only 10Gbps supported with C9600X-SUP-2.

3 Hardware capable.

Cisco Catalyst 9600 Series switches has flexible interface types and port densities that allow you to mix and match network configurations to meet the specific needs of campus networks in the following table.

Table 7.        Maximum Chassis Port Densities

Cisco Catalyst 9606R ChassisC9600-SUP-1C9600X-SUP-2
400G-8
200G-8
100G48128
50G-2561
40G96128
25G1922561
10G1922561
5G**192-
2.5G**192-
1G1928
100M**192-
10M**192-

**Using C9600-LC-48TX

1 With Breakouts

Introduction to Smart Licensing

Cisco Smart Licensing is a flexible licensing model that provides you with an easier, faster, and more consistent way to purchase and manage software across the Cisco portfolio and across your organization. And it’s secure – you control what users can access. With Smart Licensing you get:

  • Easy Activation:Smart Licensing establishes a pool of software licenses that can be used across the entire organization—no more PAKs (Product Activation Keys).
  • Unified Management:My Cisco Entitlements (MCE) provides a complete view into all your Cisco products and services in an easy-to-use portal, so you always know what you have and what you are using.
  • License Flexibility: Your software is not node-locked to your hardware, so you can easily use and transfer licenses as needed.
  • To use Smart Licensing, you must first set up a Smart Account on Cisco Software Central (software.cisco.com).

There are two choices for software subscription: Cisco DNA or Cisco Catalyst. They provide:

  • Flexible licensing models to smoothly distribute customers’ software spending over time
  • Investment protection for software purchases through software services–enabled license portability
  • Access to updates, upgrades, and new technology from Cisco through Cisco Software Support Services (SWSS)
  • Base product-level support for hardware, software, and Cisco IOS-XE (included with Cisco Catalyst Software Subscription)
  • Cisco ISE licenses included in the Advantage tier to facilitate zero-trust network security* (as part of Cisco Catalyst Software Subscription)
  • Access to end-to-end network visibility with Cisco Spaces and service assurance through Cisco ThousandEyes Network and Application Synthetics (included with the Advantage license)

Manage your entire switching structure as a single, converged component. With one management system and one policy for wired and wireless networks, it offers an efficient way to provide more secure access.

* ISE license quantities are outlined below.

ISE license quantities in Cisco Catalyst Software subscription for Switching

Eligible Product families*Cisco Catalyst 9600 SeriesCisco Catalyst 9500 SeriesCisco Catalyst 9400 SeriesCisco Catalyst 9300 Series
ISE quantity per Advantage license40 endpoint sessions for ISE10 endpoint sessions for ISE40 endpoint sessions for ISE10 endpoint sessions for ISE

Cisco Catalyst 9600 Series Supervisor 1 based switches run on Cisco IOS XE Release 16.11.1 or later. Catalyst 9600 Series Supervisor 2 based switches run on Cisco IOS XE Release 17.7.1 or later. This software release includes all the features listed earlier in the Platform Software Benefits section.

Network Licensing

Network advantage package features

Features on Cisco Catalyst uplink switchesNetwork Advantage
Switch Fundamentals

Layer 2, Routed Access (RIP, EIGRP Stub, OSPF), PBR, PIM Stub Multicast, PVLAN, VRRP, PBR, Cisco Discovery Protocol, QoS, FHS, 802.1X, CoPP, SXP, IP SLA Responder, SSO

✓
Advanced Switch Capabilities and Scale

BGP, EIGRP, HSRP, IS-IS, BSR, MSDP, PIM SM, PIM SSM, BIDIR-PIM*, IP SLA, OSPF

✓
Network Segmentation

VRF, Software-Defined Access (VXLAN, LISP, SGT), MPLS, mVPN*

✓
Automation

NETCONF, RESTCONF, gRPC, YANG, PnP Agent, ZTP/Open PnP, GuestShell (on-box Python)

✓
Telemetry and Visibility

Model-driven telemetry, sampled NetFlow, SPAN, RSPAN*

✓
Security MACsec-256✓

* C9600X-SUP-2: Not available today (Roadmap)

Cisco Catalyst Licensing

Cisco Catalyst Advantage package features

FeaturesCisco Catalyst Advantage
Switch Features
Advanced telemetry and visibility

Full Flexible NetFlow, EEM

✓
Cisco Catalyst Center Features
Day-0 network bring-up automation

Cisco Network Plug-and-Play application, network settings, device credentials, LAN automation, host onboarding

✓
Element Management

Discovery, inventory, topology, software image, licensing, and configuration management

✓
Element Management Patch management✓
Basic Assurance

Health dashboards – Network, Client, Application; switch and wired client health monitoring

✓
SD-Access

Policy-based automation and assurance for wired and wireless

✓

Managing Licenses with Smart Accounts: Creating Smart Accounts by using the Cisco Smart Software Manager (Cisco SSM) enables you to order devices and licensing packages and manage your software licenses from a centralized website. You can set up Cisco SSM to receive daily email alerts and to be notified of expiring add-on licenses that you want to renew.

You must order an add-on license in order to purchase a switch. When the license term expires, you can either renew the add-on license to continue using it or deactivate the add-on license and then reload the switch to continue operating with the base license capabilities.

Both the base and add-on licenses are also available for a 90-day evaluation period. An evaluation license is activated temporarily, without purchase. An expired evaluation license cannot be reactivated after reloading.

Note:      It is not required to deploy Cisco Catalyst Center (formerly Cisco DNA Center), just to use one of the above packages.

Cisco IOS XE

  • This modern operating system for the enterprise provides support for model-driven programmability, on- box Python scripting, streaming telemetry, container-based application hosting, and patching for critical bug fixes. Cisco IOS XE also has built-in defenses to protect against runtime attacks.
  • Plug and Play enabled: A simple, secure, unified, and integrated offering eases new branch or campus device rollouts and can also be used to provide updates to an existing network.

Advanced Security

  • Advanced Encryption Standard 256 (AES-256) support with the powerful MACsec-256 encryption algorithm is available in hardware.
  • Trustworthy solutions: Secure Unique Device Identification (SUDI) support for Plug and Play (PnP) tamper-proof device identity capability secures zero-touch provisioning by allowing your device to show a certificate to the server to be able to get on your network.

SD-Access

  • SD-Access is Cisco’s leading enterprise architecture. It includes:
    • Policy-based automation from edge to cloud.
    • Macro-segmentation and micro-segmentation made easy, with predictable performance and scalability.
    • Automation through the Cisco Catalyst Center Appliance.
    • Policy through the Cisco Identity Services Engine (ISE).
    • Network assurance through the Network Data Platform.

Physical specifications

Catalyst 9600 chassis

The following table lists physical specifications of the Cisco Catalyst 9606 chassis.

Table 8.        Physical Specifications of Cisco Catalyst 9606 Chassis

DescriptionSpecifications
SKUC9606R
Dimensions (H x W x D)35.43 x 44.2 x 40.9 cm

13.95 x 17.4 x 16.1”

Rack Units (RU)8
Chassis Weight with 2 Power Supplies (AC) and Fan tray31.31 kg (69.03 lbs)
Input VoltageAC: 90V to 264V, 47 to 63 Hz DC: -40V to -72V
Operating Temperature-5° to 45° C (23° to 113° F) up to 6000 feet (1828.8 meter)

-5° to 40° C (23° to 104° F) up to 10,000 feet (3048 meter)

Storage Temperature-40° to 75° C (40° to 167° F)
Relative Humidity, Operating and Non- operating, Non-condensing10% to 95%, Non-condensing
Altitude-60 to 3000 m (-197 to 9843 feet)
Mean Time Between Failures (MTBF) (hours)C9606R chassis: 4,113,900

C9606 fan tray: 452,570

C9600-PWR-3KWAC: 300,000

C9600-PWR-2KWAC: 300,000

C9600-PWR-2KWDC: 300,000

Chassis Weight (without Fan tray, without PSU)25.36 kg

(55.90 lbs)

Weight of Fan-tray3.56 kg

(7.85 lbs)

Weight of individual PSUsAC PSU (3000W): 1.4 kg (3.09 lbs)

AC PSU (2000W): 1.2 kg (2.65 lbs)

DC PSU (2000W): 1.28 kg (2.82 lbs)

Power supply

The Cisco Catalyst 9600 Series power supplies support two modes of operation.

Combined Mode

In combined mode, the power available for the entire chassis is equal to the sum of the output power of all of the power supplies multiplied by the share ratio. Additional power supply units operate at ~90% capacity. In combined mode, the power supplies need to be of equal wattage. The power supplies can be AC and DC mixed provided AC input voltage is 220V.

P = Power output of one PSU

Total combined mode power = P + (N-1) * P * (share ratio)

N = 1, 2, 3, or 4

Redundant N+1 Mode

The Cisco Catalyst 9600 Series chassis also supports N+1 redundancy, with N independent input circuits and safeguards against the failure of one (+1) of the circuits during a PSU failure. Additional PSUs operate at ~90% capacity. In redundant mode, the power supplies need to be of equal wattage. The power supplies can be AC and DC mixed provided AC input voltage is 220V.

Power supply specifications

The following table gives the power supply specifications for Cisco Catalyst 9600 Series switches.

Table 9.        Power Supply Specifications

Power Supply FeatureC9600-PWR-3KWACC9600-PWR-2KWACC9600-PWR-2KWDC
Max power rating3000W2000W2000W
Input voltage range and frequency90VAC to 140VAC and 180VAC to 264VAC 47 to 63 Hz90VAC to 140VAC and 180VAC to 264VAC 47 to 63 Hz-40VDC to -72VDC frequency
Power supply efficiency94% (typical)94% (typical)92% (typical)
Input current17.6A max at 115VAC (1500W)

17.6A max at 230VAC (3000W)

10.5A max at 115VAC (1050W)

10.5 A max at 230VAC (2000W)

Maximum: 60A per DC input at -40VDC input

(when full PSU loading)

Output ratings12Vmain at 125A (15000W)

12Vmain at 250A (3000W)

12Vmain at 88A

12Vmain at 167A

12Vmain at 167A
Output holdup timeAC = 20 ms minimum for systemAC = 20 ms minimum for systemAC = 5 ms minimum for system
Power-supply input receptaclesAC IEC 60320 C20AC IEC 60320 C16Amphenol C10-638976-000
Power cord ratingAC 20AAC 15ADC 70A

The power listed is the absolute maximum. Typically, the power would be 70% of absolute maximum.

BTU output

The following table shows the BTU (British Thermal Unit) output.

Table 10.     BTU details for 9606R chassis with Fan tray

Total output BTUBTU
C9606R + C9606-FAN1,621 (max)

Table 11.     Cisco Catalyst 9600 Series Power Cord Options

Power SupplyProduct NumberPower Cable Options by Country
C9600-PWR-3KWACCAB-9K20A-NANorth America/Japan 20A, 125VAC
CAB-9K16A-US2US/Japan 16A, 250VAC
CAB-9K16A-AUSAustralia 16A, 250VAC
CAB-9K16A-CHChina 16A, 250VAC
CAB-9K16A-INTInternational 16A, 250VAC
CAB-9K16A-SWSwitzerland 16A, 250VAC
CAB-9K16A-EUContinental Europe 16A, 250VAC
CAB-C19-CBNCabinet Jumper 16A, 250VAC
C9600-PWR-2KWACCAB-TA-CNChina AC Type A Power Cable
CAB-TA-ISIsrael AC Type A Power Cable
CAB-TA-APAustralia AC Type A Power Cable
CAB-TA-ARArgentina AC Type A Power Cable
CAB-TA-DNDenmark AC Type A Power Cable
CAB-TA-EUEurope AC Type A Power Cable
CAB-TA-INIndia AC Type A Power Cable
CAB-TA-ITItaly AC Type A Power Cable
CAB-TA-SWSwitzerland AC Type A Power Cable
CAB-TA-UKUnited Kingdom AC Type A Power Cable
CAB-TA-NANorth America AC Type A Power Cable
CAB-C15-CBNCabinet Jumper Power Cord, 250 VAC 13A, C14-C15 Connectors
CAB-TA-JPJapan AC Type A Power Cable
CAB-C15-CBN-JPJapan Cabinet Jumper Power Cord, 250 VAC 12A, C14-C15
CAB-TA-250V-JPJapan 250V AC Type A Power Cable
CAB-ACBZ-12AAC Power Cord (Brazil) 12A/125V BR-3-20 plug up to 12A
C9600-PWR-2KWDCPWR-2KW-DC-CBLPower Cord - 2KW DC

Fan tray

Each Cisco Catalyst 9600 Series switch uses a single serviceable fan tray for cooling. The switches can optionally be accessed from the rear for flexible cable management. The chassis is optimized for enterprise closets, with side-to-side airflow. All fan trays are composed of multiple independently controlled fans. If any single fan fails, the system will continue to operate without a significant degradation in cooling. Fan speeds change dynamically to compensate for fan failure. Cisco Catalyst 9600 Series fans have a barometric sensor, which allows slower fan speed curves at lower altitudes. The fans also have individual Pulse-Wide Modulation (PWM) fine-tuning to reduce variability in fan revolutions per minute (rpm) under throttled conditions. The measured acoustic noise in a formal NEBS test environment is 77.7 LWAd (dB). The chassis are designed to accommodate fanless operation of up to 90 seconds to enable serviceability.

Figure 2.            

Cisco Catalyst 9606R Chassis with Fan Tray

Regulatory standards compliance

The following table lists the regulatory standards compliance for Cisco Catalyst 9600 Series switches.

Table 12.     Safety and Compliance Information

DescriptionSpecification
Safety certificationsC9606R

  • IEC 60950-1 plus Am1, Am2, Am9, Am10, Am11, Am12 and all deviations and differences
  • AS/NZS 60950.1.2011
  • CAN/CSA-C22.2 No. 60950-1-07
  • GB 4943-95
  • EN 60950-1; 2006 plus Am1, Am 2, Am9, Am10, Am11, Am12 and all deviations and differences
  • NOM-019-SCFI-1998
  • UL 60950-1, Second Edition
EMI and EMC Compliance
  • 47 CFR Part 15 Class A
  • CNS13438: 2006 Class A
  • EN 300 386 V1.6.1
  • EN61000-3-2: 2014
  • EN61000-3-3: 2013
  • ICES-003 Issue 6: 2016 Class A
  • KN 32: 2015 Class A
  • TCVN 7189: 2009 Class A
  • EN 55032:2012/ AC:2013 Class A
  • EN 55032:2015 Class A
  • CISPR 32 Edition 2 Class A
  • V-2/2015.04 Class A
  • V-3/2015.04 Class A
  • CISPR24: 2010 + A1: 2015
  • EN 300 386 V1.6.1
  • EN55024: 2010 + A1: 2015
  • KN35: 2015
  • TCVN 7317: 2003

Ordering information

The following table lists the ordering information for chassis, power supplies, supervisor engines, and memory that are commonly used with the Cisco Catalyst 9600 Series, as well as the Cisco DNA and Cisco Catalyst term licenses.

Table 13.     Ordering information

Product NumberDescription
C9606R (=)Cisco Catalyst 9600 Series 6 Slot Chassis
C9600-SUP-1 (=)Cisco Catalyst 9600 Series Supervisor 1 Module
C9600-SUP-1/2Cisco Catalyst 9600 Series Redundant Supervisor 1 Module
C9600X-SUP-2 (=)Cisco Catalyst 9600 Series Supervisor 2 Module
C9600X-SUP-2/2Cisco Catalyst 9600 Series Redundant Supervisor 2 Module
C9600-LC-24C (=)Cisco Catalyst 9600 Series 24-Port 40GE/12-Port 100GE line card
C9600-LC-48YL (=)Cisco Catalyst 9600 Series 48-Port 50GE/25GE/10GE/1GE/100M line card
C9600-LC-48TX (=)Cisco Catalyst 9600 Series 48-port RJ45 Copper – 10GE/5GE/2.5GE/1GE/100Mbps/10Mbps line card
C9600-LC-48S (=)Cisco Catalyst 9600 Series 48-Port 1GE/100M line card
C9600-LC-40YL4CD (=)Cisco Catalyst 9600 Series Combo line card

40 ports 50/25/10/1GE SFP56

2 ports 200/100/40QSFP56 uplinks

2 ports 400/200/100GE QSFP-DD uplinks

C9600X-LC-56YL4C (=)Cisco Catalyst 9600 Series Combo line card

56 ports 50/25/10/1GE SFP56

4 ports 100/40GE QSFP28 uplinks

C9600X-LC-32CD (=)Cisco Catalyst 9600 Series Combo line card

30 ports 100/40G QSFP28

2 ports 400/200/100G QSFP-DD

C9606-FAN (=)Cisco Catalyst 9600 Series C9606 Chassis Fan Tray
C9K-F2-SSD-240GB (=)Cisco Catalyst 9600 Series 240GB SSD Storage
C9K-F2-SSD-480GB (=)Cisco Catalyst 9600 Series 480GB SSD Storage
C9K-F2-SSD-960GB (=)Cisco Catalyst 9600 Series 960GB SSD Storage
Cisco DNA Software Term LicensesDescription
C9600-DNA-AC9600 Cisco DNA Advantage Software subscription Term License
C9600-DNA-A-3YC9600 Cisco DNA Advantage Software subscription, 3 Year License
C9600-DNA-A-5YC9600 Cisco DNA Advantage Software subscription, 5 Year License
C9600-DNA-A-7YC9600 Cisco DNA Advantage Software subscription, 7 Year License
Cisco Catalyst Software term licenseDescription
C9600-DNX-A-3YC9600 Advantage Catalyst Software subscription, 3Y License
C9600-DNX-A-5YC9600 Advantage Catalyst Software subscription, 5Y License
C9600-DNX-A-7YC9600 Advantage Catalyst Software subscription, 7Y License
Power SuppliesDescription
C9600-PWR-3KWAC (=)Cisco Catalyst 9600 Series 3000W AC Power Supply
C9600-PWR-2KWAC (=)Cisco Catalyst 9600 Series 2000W AC Power Supply
C9600-PWR-2KWDC (=)Cisco Catalyst 9600 Series 2000W DC Power Supply
Spare Accessories and KitsDescription
C9606-SLOT-BLANK (=)Cisco Catalyst 9600 Series Blank for Chassis Module Slot
C9606-PWR-BLANK (=)Cisco Catalyst 9600 Series Blank for Chassis Power Supply Slot
CAB-CONSOLE-USBConsole Cable 6ft with USB Type A and mini-B
CAB-CONSOLE-RJ45Console Cable 6ft with RJ45 and DB9F
C9606-RACK-KIT=Cisco Catalyst 9600 Series 6 slot chassis Rack Mount
C9606-ACC-KIT=Cisco Catalyst 9600 Series 6 slot chassis Accessory Kit
C9606-SHELF-KIT=Cisco Catalyst 9600 Series 6 slot chassis Shelf Install Kit
C9606-FB-23-KIT=Cisco Catalyst 9600 Series 6 slot chassis Front to Back Kit

Warranty

Cisco Enhanced Limited Lifetime Hardware Warranty

Cisco Catalyst 9600 Series switches come with an Enhanced Limited Lifetime Warranty (E-LLW) that includes Next-Business-Day (NBD) delivery of replacement hardware where available and 90 days of 8x5 Cisco Technical Assistance Center (TAC) support. Your formal warranty statement, including the warranty applicable to Cisco software, appears in the information packet that accompanies your Cisco product. We encourage you to carefully review the warranty statement shipped with your specific product before use. Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.

The following table provides information about the E-LLW.

Table 14.     Enhanced Limited Lifetime Warranty (E-LLW) Details

DescriptionCisco E-LLW
Devices CoveredApplies to Cisco Catalyst 9600 Series switches.
Warranty DurationAs long as the original customer owns the product.
End-of-Life PolicyIn the event of discontinuance of product manufacture, Cisco warranty support is limited to 5 years from the announcement of discontinuance.
Hardware ReplacementCisco or its service center will use commercially reasonable efforts to ship a replacement for NBD delivery, where available. Otherwise, a replacement will be shipped within 10 working days after receipt of the Return Materials Authorization (RMA) request. Actual delivery times might vary depending on customer location.
Effective DateHardware warranty commences from the date of shipment to customer (and in case of resale by a Cisco reseller, not more than 90 days after original shipment by Cisco).
TAC SupportCisco will provide during business hours, 8 hours per day, 5 days per week, basic configuration, diagnosis, and troubleshooting of device-level problems for up to a 90-day period from the date of shipment of the originally purchased Cisco Catalyst 9600 Series product. This support does not include solution or network level support beyond the specific device under consideration.
Cisco.com accessWarranty allows guest access only to Cisco.com.

Cisco Services

Successfully deploy, manage, and support Cisco Catalyst 9000 switches with a full life cycle of Cisco Services including implementation, optimization, technical, managed and training services. Our team of experts can help you speed deployment, reduce costs and minimize risk as you introduce new hardware, software and protocols into the network. As your trusted advisor, we help you achieve extraordinary business outcomes, minimize risk and disruption so you can anticipate change and pivot quickly, securely, and confidently.

Table 16.     Technical Services

Cisco Technical Services
Cisco Smart Net Total Care Service

  • Around-the-clock, global access to the Cisco TAC
  • Unrestricted access to the extensive Cisco.com knowledge base and tools
  • NBD, 8x5x4, 24x7x4, and 24x7x2 advance hardware replacement and onsite parts replacement and installation available
  • Ongoing operating system software updates within the licensed feature set 1
  • Proactive diagnostics and real-time alerts on Smart Call Home-enabled devices
Cisco Solution Support Service

  • Provides a team of experts who act as primary point of contact to deliver centralized support, including in multivendor network environments
  • Speed is paramount when problems arise, so we deliver on a 30-minute service level objective and prioritize Solution Support cases
  • Expert guidance helps to enhance IT operations with fewer outages and faster problem resolution while maximizing performance and reliability of Catalyst 9600 Series switches
  • We even look beyond identified problems and provide the necessary guidance needed to help you avoid any pitfalls before they can disrupt IT or your business

1 Cisco operating system updates include the following: maintenance releases, minor updates, and major updates within the licensed feature set.

GET Catalyst 9600 Series Switch Pricing

To receive Cisco Catalyst 9600 Series Chassis price, please send us a message.

Scroll to Top